This page will reserved for the GPON SFP ONT from Nokia, the G-010S-A. The information is being updated.
If you have something to add, please leave a comment. Thank you!
root@NOKIA:/# cat /proc/cpuinfo
system type : Falcon rev A22
machine : SFP - Lantiq Falcon SFP Stick
processor : 0
cpu model : MIPS 34Kc V5.6
BogoMIPS : 265.98
wait instruction : yes
microsecond timers : yes
tlb_entries : 16
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0240, 0x0060, 0x0020]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented : mips16 dsp mt
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
root@NOKIA:/etc# cat openwrt_release
DISTRIB_ID="OpenWrt"
DISTRIB_RELEASE="7.5.3"
DISTRIB_REVISION="14.07_ltq"
DISTRIB_CODENAME="sfp"
DISTRIB_TARGET="lantiq/generic"
DISTRIB_DESCRIPTION="OpenWrt SFP 7.5.3"
DISTRIB_TAINTS="no-all busybox"
root@NOKIA:/etc# uname -a
Linux NOKIA 3.10.49 #1 Mon Mar 21 15:34:09 CST 2022 mips GNU/Linux
root@NOKIA:/etc# cat device_info
DEVICE_MANUFACTURER="OpenWrt"
DEVICE_PRODUCT="Lantiq GPON Evaluation System (SFP)"
DEVICE_REVISION="v0"
dmesg (boot log)
root@NOKIA:/sbin# dmesg
[ 0.000000] Linux version 3.10.49 (sean@Lantiq-DEV) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 14.07_ltq) ) #1 Mon Mar 21 15:34:09 CST 2022
[ 0.000000] SoC: Falcon rev A22
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is SFP - Lantiq Falcon SFP Stick
[ 0.000000] e=memsize=64
[ 0.000000] e=initrd_start=0xA0000000
[ 0.000000] e=initrd_size=0x0
[ 0.000000] e=flash_start=0x00000000
[ 0.000000] e=flash_size=0x0
[ 0.000000] e=ethaddr=ac:9a:96:00:00:00
[ 0.000000] MEMSIZE = 67108864
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 03f00000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03efffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03efffff]
[ 0.000000] On node 0 totalpages: 16128
[ 0.000000] free_area_init_node: node 0, pgdat 803149f0, node_mem_map 81003ec0
[ 0.000000] Normal zone: 126 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16128 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16002
[ 0.000000] Kernel command line: rootfstype=squashfs,jffs2 ip=192.168.1.10:192.168.1.100:192.168.2.1::::off ethaddr=ac:9a:96:00:00:00 machtype=SFP vpe1_load_addr=0x83f00000 vpe1_mem=1M mem=63M mtdparts=sflash:256k(uboot)ro,512k(uboot_env),6144k(linux),6144k(image1),1024k(configfs),2112k(logfs),64k(ri),64k(sfp),64k(ribackup) quiet console=ttyLTQ0,115200 init=/etc/preinit
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00004441
[ 0.000000] Readback ErrCtl register=00004441
[ 0.000000] Memory: 60204k/64512k available (2597k kernel code, 4308k reserved, 664k data, 184k init, 0k highmem)
[ 0.000000] NR_IRQS:328
[ 0.000000] Setting up vectored interrupts
[ 0.000000] CPU Clock: 400MHz
[ 0.032000] Calibrating delay loop... 265.98 BogoMIPS (lpj=531968)
[ 0.036000] pid_max: default: 32768 minimum: 301
[ 0.036000] Mount-cache hash table entries: 512
[ 0.040000] pinctrl core: initialized pinctrl subsystem
[ 0.040000] NET: Registered protocol family 16
[ 0.060000] pinctrl-falcon pinctrl.4: Init done
[ 0.080000] bio: create slab <bio-0> at 0
[ 0.080000] FALC(tm) ON GPIO Driver, (C) 2012 Lantiq Deutschland Gmbh
[ 0.088000] Switching to clocksource MIPS
[ 0.092000] NET: Registered protocol family 2
[ 0.092000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.092000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.092000] TCP: Hash tables configured (established 512 bind 512)
[ 0.092000] TCP: reno registered
[ 0.092000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.092000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.092000] NET: Registered protocol family 1
[ 0.092000] RPC: Registered named UNIX socket transport module.
[ 0.092000] RPC: Registered udp transport module.
[ 0.092000] RPC: Registered tcp transport module.
[ 0.092000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.096000] EASY98000 LED driver, Version 1.0.1 (c) Copyright 2013, Lantiq Deutschland GmbH
[ 0.096000] Wired TLB entries for Linux read_c0_wired() = 0
[ 0.096000] config3 0x2425 MT 1
[ 0.096000] MVPControl 0x2, STLB 0 VPC 1 EVP 0
[ 0.096000] mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1
[ 0.100000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.100000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.100000] msgmni has been set to 117
[ 0.100000] io scheduler noop registered
[ 0.100000] io scheduler deadline registered (default)
[ 0.104000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 104) is a lantiq,asc
[ 0.104000] console [ttyLTQ0] enabled, bootconsole disabled
[ 0.108000] m25p80 spi0.0: found mx25l12805d, expected s25fl129p0
[ 0.108000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.108000] 9 cmdlinepart partitions found on MTD device sflash
[ 0.108000] Creating 9 MTD partitions on "sflash":
[ 0.108000] 0x000000000000-0x000000040000 : "uboot"
[ 0.112000] 0x000000040000-0x0000000c0000 : "uboot_env"
[ 0.116000] 0x0000000c0000-0x0000006c0000 : "linux"
[ 0.116000] 0x0000001e7f89-0x0000006c0000 : "rootfs"
[ 0.116000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.120000] mtd: device 3 (rootfs) set to be root filesystem
[ 0.120000] mtd: partition "rootfs_data" created automatically, ofs=0x4c0000, len=0x200000
[ 0.120000] 0x0000004c0000-0x0000006c0000 : "rootfs_data"
[ 0.120000] 0x0000006c0000-0x000000cc0000 : "image1"
[ 0.124000] 0x000000cc0000-0x000000dc0000 : "configfs"
[ 0.128000] 0x000000dc0000-0x000000fd0000 : "logfs"
[ 0.128000] 0x000000fd0000-0x000000fe0000 : "ri"
[ 0.132000] 0x000000fe0000-0x000000ff0000 : "sfp"
[ 0.132000] 0x000000ff0000-0x000001000000 : "ribackup"
[ 0.136000] wdt 1f8803f0.watchdog: Init done
[ 0.140000] TCP: cubic registered
[ 0.140000] NET: Registered protocol family 17
[ 0.140000] 8021q: 802.1Q VLAN Support v1.8
[ 12.192000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 12.196000] Freeing unused kernel memory: 184K (80332000 - 80360000)
[ 15.080000] pps_core: LinuxPPS API ver. 1 registered
[ 15.080000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 15.080000] PTP clock support registered
[ 18.988000] jffs2: notice: (293) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 22 of xref (0 dead, 1 orphan) found.
[ 21.580000] IFXOS, Version 1.6.6 (c) Copyright 2009, Lantiq Deutschland GmbH
[ 21.652000] NET: Registered protocol family 10
[ 21.684000] GPON SFP I2C Slave Driver, Version 2.2.1 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
[ 21.688000] [sfp_i2c] vpe code <sfp_i2c_vpe.bin> with size <4060 bytes> loaded!
[ 21.688000] VPE loader: VPE1 running successfully
[ 21.772000] FALC(tm) ON Optic Driver, version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
[ 22.240000] FALC(tm) ON Base Driver, Version 7.5.1.0 (c) Copyright 2017, Intel Corporation - Testpatch GPONSW-3406 v H05
[ 22.276000] FALC(tm) ON Ethernet Driver, Version 7.5.1.0 (c) Copyright 2017, Intel Corporation - Testpatch GPONSW-3406 v H05
[ 22.296000] nf_conntrack version 0.5.0 (943 buckets, 3772 max)
[ 22.352000] xt_time: kernel timezone is -0000
[ 22.356000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.264000] i2c /dev entries driver
[ 29.296000] Custom GPIO-based I2C driver version 0.1.1
[ 29.308000] i2c-gpio i2c-gpio.0: using pins 37 (SDA) and 38 (SCL)
[ 39.476000] [onu] serial number: VNPT034BB2C1
[ 39.740000] [onu] password: A02134926
[ 40.940000] [onu] GPHY Firmware loaded into RAM (phy11g.bin)
[ 41.176000] [onu] PE[255] firmware loaded v9.90.6.1
[ 42.920000] libphy: Falcon MDIO: probed
[ 42.940000] IPv6: ADDRCONF(NETDEV_UP): host: link is not ready
[ 43.004000] IPv6: ADDRCONF(NETDEV_UP): lct0: link is not ready
[ 44.244000] IPv6: ADDRCONF(NETDEV_UP): lct0: link is not ready
[ 45.348000] IPv6: ADDRCONF(NETDEV_UP): dbc: link is not ready
[ 51.536000] IPv6: ADDRCONF(NETDEV_UP): host: link is not ready
[ 54.456000] [onu] PLOAM Rx - message lost
[ 54.456000] [onu] PLOAM loss detected, but not in O5
[ 54.580000] device exc entered promiscuous mode
[ 54.952000] IPv6: ADDRCONF(NETDEV_CHANGE): lct0: link becomes ready
[ 58.348000] IPv6: ADDRCONF(NETDEV_CHANGE): host: link becomes ready
[ 58.352000] IPv6: ADDRCONF(NETDEV_CHANGE): dbc: link becomes ready